01
Machining
Machining of engineering components is named on the ISO 9001:2015 scope. It is the step every reverse engineered part passes through, and the reason a worn shaft or a missing spare does not end a job.
Custom fabrication · Indigenisation
Capability index
What the shop and the crew can do
The same eight services the divisions sell, arranged by what actually happens to the metal. Eight groups, all of them inside the certified scope.
- Groups
- 08
- Divisions
- Marine, defence
- Certified
- ISO 9001:2015
- Since
- 2015
By process
Eight groups of work
Read down this list rather than across the divisions. A shaft does not care which page of a website it was sold from.
02
Fabrication
Custom fabrication through reverse engineering, in the same shop that builds handling trolleys, cradles and frames for the defence side.
Custom fabrication
03
Overhaul and rebuild
Propulsion and hydraulic system overhaul on ships and tugs, listed on the certified scope as maintenance of equipment.
System overhaul
04
Shaft line work
Complete shaft line work, carried by the marine division since 2015: the shaft, its couplings, its bearings and the alignment of the line it runs in.
Shafting
05
Hull work
Hull maintenance on ships and tugs, run out of the Visakhapatnam office.
Hull maintenance
06
Installation aboard
Equipment installation on ships and tugs, inside the marine services named on the certified scope.
Equipment installation
07
Electrical and control
Special electrical equipment for defence contract works, beside the design and development of control systems named on the certified scope.
Special electrical equipment
08
Supply
Aviation lubricant supply, the supply side of the defence contract works.
Aviation lubricant supply
The honest gap
The machine list is not published yet
Capacities, swing, bed length and the rest of the shop inventory are not on this site because they are not yet on record. Ask, and you get the real list for the job in hand rather than a page of numbers written to look impressive.
Ask for the shop listHow it maps to the divisions
01 Marine engineering
- Hull maintenance
- Hull maintenance on ships and tugs, run out of the Visakhapatnam office.
- Equipment installation
- Equipment installation aboard ships and tugs, inside the marine services named on the ISO 9001:2015 scope.
- System overhaul
- Propulsion and hydraulic overhaul, listed on the certified scope as maintenance of equipment.
- Shafting
- Complete shaft line work on ships and tugs, carried by this division since 2015.
02 Defence contract works
- Indigenisation
- Defence parts made by reverse engineering when the original manufacturer no longer supplies them.
- Custom fabrication
- Custom fabrication through reverse engineering, with machining of engineering components on the certified scope.
- Special electrical equipment
- Special electrical equipment for defence contract works, beside the design and development of control systems on the certified scope.
- Aviation lubricant supply
- Aviation lubricant supply, the supply side of the defence contract works.
Describe the work, not the category
Send the drawing, the part, the vessel or the problem. The right division is our problem to sort out.